|
Technical Specifications
•
Network Ports:
-8 auto speed-sensing 10/100 RJ-45 ports
• Network Protocol and Standards:
-IEEE 802.3i 10BASE-T
-IEEE 802.3u 100BASE-TX
-IEEE 802.3x Flow Control
-IEEE 802.3af DTE Power via MDI
• Performance Specifications:
-Forwarding modes:Store-and-forward
-Bandwidth:1.6 Gbps
-Network latency:Less than 20 µs for 64-byte
frames in store-and-forward mode for 100 Mbps
to 100 Mbps transmission
-Buffer memory:96 KB embedded memory
per unit
-Address database size:1,000 media access
control (MAC) addresses per system
-Addressing:48-bit MAC address
-Mean Time Between Failure (MTBF):190,000
hours (~ 21 years)
•Status LEDs:
-System:Power, PoE Maximum Power
-Per Port:Link, Activity, Speed, PoE Active,
PoE Fault
•Power Supply:
-Total Power Consumption:44 W maximum
-802.3af Power Consumption:32 W maximum
(Ports 1 – 4)
-48VDC, 0.8A power output; plug is localized to
country of sale
•Physical Specifications:
-Dimensions (H x W x D):1.1 x 9.3 x 4.1 in.
(27 x 235 x 103 mm)
-Weight:1.7 lbs. (0.74 kg)
•Environmental Specifications:
-Operating temperature:32 to 104°F (0 to 40°C)
-Storage temperature:14 to 158°F (-10 to 70°C)
-Operating humidity:90% maximum relative
humidity, non-condensing
-Storage humidity:95% maximum relative
humidity, non-condensing
-Operating altitude:10,000 ft (3,000 m)
maximum
-Storage altitude:10,000 ft (3,000 m) maximum
•Electromagnetic Emissions:
-CE mark, commercial
-FCC Part 15 Class B
-VCCI Class B
-EN 55022 (CISPR 22), Class B
-C-Tick |
• Electromagnetic Immunity:
-EN 55024• Safety:
-CE mark, commercial
-CE/LVD EN60950
• Warranty:
-5 years for switch
-2 years for power supply
Package Contents
-ProSafe 8 Port 10/100 Switch with Power over
Ethernet FS108P
-AC Adapter
-Wall-mount kit
-Installation guide
-Warranty/Support Information card
NETGEAR Related Products
-ProSafe 802.11g Wireless Access Point WG302
-ProSafe 802.11g Wireless Access Point WG102
-FA311 NIC 10/100 Low Profile PCI Network
Interface Card |
