|
Technical
Specifications
• Wireless:
-IEEE 802.11g 54 Mbps Wireless Access Point
-Two (2) 5 dBi detachable antennas
-Typical maximum power output: 19.8 dBm
-Typical maximum receive sensitivity: 96 dB
Note: Maximum Tx varies based on country and/or region selection to
ensure
local regulatory compliance.
• Physical Interfaces:
-One (1) 10/100BASE-T Ethernet (RJ-45) port with
™
Auto Uplink(Auto MDI-X) with IEEE 802.3af
Power over Ethernet (PoE) support
-Power adapter: Output 12 VDC, 1.2A (Power
adapter is localized to country of sale for Australia,
Europe, North America, and the UK.)
-Five (5) LEDs: Power, Test, 100 Mbps, Link/ACT,
and WLAN 802.11g
-One (1) console port with standard RS-232C
interface with DB-9 male connector
-Two (2) reverse SMA antenna connectors
• Physical Specifications:
-Dimensions:190 x 124 x 32 mm (7.4 x 4.8 x
1.25 in.)
-Weight:574 g (1.27 lb)
®
-Processor and memory:IntelIXP422, 8 MB
Flash, 16 MB DRAM •
Environmental Specifications:
-Operating temperature:0°to 40°C (32°to 104°F)
-Operating humidity:90% maximum relative
humidity, noncondensing
• Network Management:
-Remote configuration and management through
Web browser, SNMP or Telnet with command line
interface (CLI)
-SNMP management supports SNMP MIB I,
MIB II, and 802.11 MIB
• Advanced wireless
features:
-Wireless Distribution System
-Point-to-point wireless bridge mode
-Point-to-multipoint wireless bridge mode
-Repeater mode
-Simultaneous wireless bridge and access point mode
-Adjustable output power control 100 mW down
to 0 mW |
• Security:
-40/64-, 128-, and 152-bit WEP encryption
-Block SSID Broadcast
-VPN pass-through support
-MAC address filtering with access control lists –
up to 256 users
-802.1x RADIUS support with EAP TLS,
TTLS, PEAP
Wi-Fi Protected Access (WPA)***
-Secure SSH Telnet
Secure Socket Layer (SSL) remote management
login***
Wireless isolation enables peer-to-peer blocking
so users may not access another user’s PC
• Standards, Safety and
Electromagnetic
Conformance:
IEEE 802.11g (2.4 GHz Frequency Band, DSSS
Modulation Technique)
IEEE 802.3af Power over Ethernet (PoE)
FCC Part 15 Subpart B and Subpart C
CE EN60950, EN 300328-2 v1.1.1 (2000-07),
EMC EN301489-1 v1.2.1 (2000-08), and
EN301489-17 v1.1.1 (2000-09)
EN55022(B), CISPR22(B), AS/NZS 3548(B)
• Warranty:
NETGEAR 3-year warranty
Package Contents
-ProSafe 802.11g Wireless
Access Point WG302
-Two (2) 5 dBi Detachable Antennas
-Resource CD
-Power adapter
-3 m (10-ft) Ethernet cable
-Wall Mounting Kit
-Installation guide
-Warranty/support information card
-System Requirements
-Windows98, Me, 2000, or XP
-2 Mbytes of available disk space
Antennas
and Accesories
-ANT24O5 5 dBi Omni-directional antenna
-ANT24D18 18 dBi Directional antenna
Five (5) antenna cable lengths: 1.5, 3, 5, 10,
and 30 m |
