Кабельные системы здания / офиса. Сетевая и системная интеграцияРейтинг ресурсов УралWeb


  О компании
  Прайс-лист (.xls)
  Прайс-лист (.zip)


  Беспроводное оборудование
  Сетевые адаптеры
  Принт сервера
  Цифровой дом
  Программное обеспечение

  Техническая поддержка


        Быстрый поиск продукта           


Неуправляемый коммутатор FS116P

ProSafe 16 Port 10/100 Switch with 8 Port Power over Ethernet

The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected.Easy and reliable, the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink™. The affordably priced ProSafe FS116P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS116P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.

Technical Specifications

•Network Ports:
-16 auto speed-sensing 10/100 RJ-45 ports

•Network Protocol and Standards:
-IEEE 802.3i 10BASE-T
-IEEE 802.3u 100BASE-TX
-IEEE 802.3x Flow Control
-IEEE 802.3af DTE Power via MDI

•Performance Specifications:
-Forwarding modes:Store-and-forward
-Bandwidth:3.2 Gbps
-Network latency:Less than 20 µs for 64-byte
frames in store-and-forward mode for 100 Mbps
to 100 Mbps transmission
-Buffer memory:96 KB embedded memory
per unit
-Address database size:1,000 media access
control (MAC) addresses per system
-Addressing:48-bit MAC address
-Mean Time Between Failure (MTBF):116,009
hours (~ 13 years)
-Acoustic noise:0 dB

•Status LEDs:
-System:Power, PoE Maximum Power
-Per Port:Link, Activity, Speed, PoE Active,
PoE Status

•Power Supply:
-Total Power Consumption:88 W maximum
-802.3af Power Consumption:55 W maximum
(Ports 1 – 8)
-48VDC, 4.5 power output; plug is localized to
country of sale

•Physical Specifications:
-Dimensions (W x D x H):11.3 x 4.1 x 1.1 in.
(287 x 103 x 27 mm)
-Weight:1.85 lbs (0.84 kg)

•Environmental Specifications:
-Operating temperature:32 to 104°F (0 to 40°C)
-Storage temperature:14 to 158°F (-10 to 70°C)
-Operating humidity:90% maximum relative
humidity, non-condensing
-Storage humidity:95% maximum relative
humidity, non-condensing
-Operating altitude:10,000 ft (3,000 m)
-Storage altitude:10,000 ft (3,000 m) maximum

•Electromagnetic Emissions:
-CE mark, commercial
-FCC Part 15 Class A
-VCCI Class A
-EN 55022 (CISPR 22), Class A

• Electromagnetic Immunity:
-EN 55024

• Safety:
-CE mark, commercial
-CE/LVD EN60950

• Warranty:
-5 years for switch
-2 years for power supply

Package Contents
-ProSafe 16 Port 10/100 Switch with Power over
Ethernet FS116P
-AC Adapter
-Wall-mount kit
-Installation guide
-Warranty/Support Information card

NETGEAR Related Products
-ProSafe 802.11g Wireless Access Point WG302
-ProSafe 802.11g Wireless Access Point WG102
-FA311 NIC 10/100 Low Profile PCI Network
Interface Card
-ProSafe 8 Port 10/100 Switch with PoE FS108P
-ProSafe 24 + 2 Smart Switch with PoE FS726TP

ЗАО "Новаком" тел./факс (343) 263-74-66 (многоканальный),   info@novacom.ru